Registered: 1 week, 2 days ago
Floor Protection - A Product Guide
Your floors want particular protection when undergoing remodeling, during new construction, moving heavy furniture or equipment, and for other events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors in an effort to make informed decisions on the most effective product to use for your needs.
Types of Protection Packaging:
Floor protection products are commonly packaged as either:
(1) Products by the roll: These embrace common adhesive films, rolled paper products and rolled textile protection. Protective supplies purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as 48 mils thick).
(2) Products by the sheet: These embody corrugated plastic, masonite, and different rigid protection. Protective supplies purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and normally come as four ft by eight feet.
Type of Flooring Protection:
Paper protection is suitable for all hard surfaces and resilient surfaces but doesn't work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can typically depart adhesive residue when removed. Frequent paper protection products embrace:
· Ramboard™ A coated compressed paper board 38 mils thick that is breathable, waterproof and made from recycled paper.
· Kraft paper is a lightweight brown paper that is inexpensive however does not afford any impact protection and can easily tear
· Scrim paper could incorporate coatings or reinforcements to make them waterproof as well as scrim threads to reinforce the paper and prevent tearing. These improved papers are longer lasting than common Kraft paper or rosin paper however they're additionally too thin to offer much impact protection.
· Rosin paper is thicker than Kraft paper and is very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The massive drawback of using Rosin paper is that it may cause a everlasting stain if the paper gets wet. Rosin paper can also rip easily so it not normally really useful for use
· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection however it isn't coated with a waterproof end and must be kept dry at all times in order that it doesn't disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.
Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping so that they should not be used on any floors which are curing. Two of the nice benefits of polyethylene films are that films will flex and contour to allow them to be used on carpets as well as hard surfaces. These films do not provide any impact protection and are normally rated for short time period use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled materials making them a poor alternative in maintainable protection. Protection films are available in a wide range of adhesion "tack". Hard surface protection films could have a lower tack and color than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.
Plywood and Masonite are commonly used as protection on commercial projects with plenty of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Both plywood and Masonite are sold in the usual dimension of four ft by eight feet and are more expensive per sq. foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/four inch thick. Plywood is commonly 1/4 inch to 3/4 inch thick. Both products provide impact protection on a wide range of floor types and provide adequate protection in opposition to heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable however they are bulky to carry and store. These wood sheets ought to be used on high of a softer protection akin to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they stop wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not offer moisture protection and may be harder to chop to dimension than different protection types.
If you beloved this post and you would like to acquire more data about correx kindly go to our own web page.
Topics Started: 0
Replies Created: 0
Forum Role: Participant